Basic Info.
Application
Communication
Certification
RoHS, ISO9001
Product Description
PRODUCT DESCRIPTION
Product Introduction
G.652D optical fiber is ideally designed for use in metropolitan, local and access networks.
G.652D non-dispersion-shifted single-mode optical fiber adopts advanced rod making and wire drawing technology to reduce the water peak loss of 1383nm, and the working wavelength is extended to E-band(1360nm-1460nm), realizing full-band transmission of O, E, S, C and L(1260nm-1625nm). At the same time, it has stable and superior polarization mode dispersion coefficient, which can meet the long distance and high speed transmission.
G.652D non-dispersion-shifted single-mode optical fiber adopts UV curing technology and uses double-layer bending loss-insensitive acrylic resin coating layer, which has a good protective effect on the fiber cladding and can meet the application of different occasions. G.652D optical fiber adopts advanced coating curing technology to provide superior dynamic fatigue resistance and increase the service life of the optical fiber.
The G.652D optical fiber we provided has the following characteristics:
1) Achieve O, E, S, C, L(1260nm-1625nm) full-band transmission, increase the transmission bandwidth.
2) Flexible selection of various coatings to meet the needs of different application occasions.
3) Small polarization mode dispersion coefficient, suitable for high-speed transmission.
4) Superior dynamic fatigue resistance, suitable for use in different environments.
Application
Mainly used in various types of optical cable to play the role of communication.
Technical Parameters
Optical Characteristic
Attenuation |
Wavelength(nm) | Max.Value(dB/km) bare | Max.Value(dB/km) colored |
1310 | 0.344 | 0.354 |
1383 | 0.344 | 0.354 |
1550 | 0.204 | 0.214 |
1625 | 0.234 | 0.244 |
Attenuation vs Wavelength |
Wavelength Range(nm) | Ref. wavelength(nm) | Max. Difference(dB/km) |
1285~1330 | 1310 | 0.05 |
1525~1575 | 1550 | 0.05 |
Point Discontinuity |
Wavelength(nm) | Point Discontinuity (dB) |
1310 | 0.05 |
1550 | 0.05 |
Macrobend Loss |
Mandrel Diameter(mm) | Turn Number | Wavelength(nm) | Induced Attenuation(dB) |
50 | 100 | 1550 | ≤0.05 |
50 | 100 | 1625 | ≤0.10 |
Cutoff Wavelength |
Cable cutoff wavelength(nm) | ≤1260 |
Mode Field Diameter |
Wavelength(nm) | Mode Field Diameter(μm) |
1310 | 9.2±0.4 |
Dispersion |
Wavelength(nm) | Dispersion Value(ps/(nm•km)) |
1288~1339 | ≤3.5 |
1271~1360 | ≤5.3 |
1550 | ≤18 |
1625 | ≤22 |
Zero Dispersion Wavelength(nm) | 1300~1324 |
Zero Dispersion Slope(ps/(nm2•km)) | ≤0.092 |
PMD |
Max. Individual Value (ps/√km) | ≤0.1 |
Dimensional Characteristic
Fiber Curl(m) | ≥4.0 |
Cladding Diameter(μm) | 125±1 |
Core/Cladding Concentricity Error(μm) | ≥0.64 |
Cladding Non-circularity (%) | ≤1.0 |
Coating Diameter (uncolored) (μm) | 245±7 |
Coating Diameter (colored) (μm) | 250±15 |
Coating Non-circularity (%) | ≤6.0 |
Coating/cladding Concentricity Error(μm) | ≤12 |
Mechanical Characteristic
Proof Test (GPa) | ≥0.69 |
Coating Stripe Force Peak Value (N) | 1.0~8.9 |
Environmental Characteristic
Temperature Dependence (-60ºC~+85ºC) | ≤0.05dB/km @1310nm &1550nm |
Damp Heat (85±2ºC, Up to 85% RH,30 days) | ≤0.05dB/km @1310nm &1550nm |
Water Immersion (23±2ºC, 30 days) | ≤0.05dB/km @1310nm &1550nm |
Heat Aging (85±2ºC, 30 days) | ≤0.05dB/km @1310nm &1550nm |
PACKAGING/ STORAGE
Packaging
G.652D optical fiber is taken up on plastic spool, put into a carton, and then stacked on the pallet and fixed with wrapping film.
Plastic spools are available in three sizes.
(1) 25.2km/spool
(2) 48.6km/spool
(3) 50.4km/spool
Storage
1) The product should be kept in a clean, hygienic, dry and ventilated storehouse.
2) The product should not be stacked together with flammable products and should not be close to fire sources.
3) The product should avoid direct sunlight and rain.
4) The product should be packed completely to avoid moisture and pollution.
5) The product shall be protected from heavy pressure and other mechanical damage during storage.
Address:
Xinsheng Plaza, Hubei Road, Xuzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Metallurgy, Mineral & Energy
Company Introduction:
ONE WORLD focus on production of wire and cable materials, including raw material and auxiliary materials. These materials cover the fields of electrical power cables, optical cables, data cables, and other special cables. We have three factories: The first one is mainly in water blocking tapes, semi-conductive water blocking tapes, mica tapes, etc. The second one is mainly in mylar tapes, plastic coated aluminum/copper tapes, aluminum/copper foil mylar tapes, etc. The third is mainly in optical cable materials, including polyester binding yarn, GFRP, etc.
We also have invested in optical fiber, aramid yarn, PBT plants to enlarge our supply scope. We have our own technical team, meanwhile we develop materials with materials research institutes, we have our own laboratory to est the finished materials, allour materials research institutes.
Our materials have been exported to a lot of countries. By focusing on the electricity and signal transmission around the whole world, ONE WORLD members put all efforts to make the whole world lighted and interconnected, to meet a better one world.